gpd win max 2 oculink egpu compatibility test result 显卡坞兼容性和各家线序情况
|
PC
|
m.2 to oculink adapter 转接板
|
oculink cable 数据线
|
oculink to pci-e 4.0 adapter 主板卡
|
test result 实测结果
|
|
GPD win max2
oculink SFF-8612 数据接口 or m2 硬盘接口
|
-
|
Supermicro CBL-SAST-0818 SFF-8611
|
KEPRICE cem mini SFF-9402
|
boot manual on success 手动启停运行成功
|
|
KEPRICE version SFF-8612
|
boot manual on success 手动启停运行成功
|
|||
|
-
|
ubest-tech 1.2M 4i SFF-8611
|
boot manual on success 手动启停运行成功
|
||
|
-
|
Supermicro CBL-SAST-0818 SFF-8611
|
NFHK n-p114-a m.2 version SFF-8612 changed 改线序
|
boot manual on success 手动启停运行成功
|
|
|
-
|
ubest-tech 1.2M 4i SFF-8611 信号增强版，标准线序
|
boot manual on success 手动启停运行成功
|
||
|
-
|
amphenol JVCBL 1042491 SFF-8611
|
boot manual on success 手动启停运行成功
|
||
|
NFHKST N-8611Y-A SFF-8612 changed 改线序
|
boot auto on/off success
|
|||
|
-
|
inspur V0160M6 SFF-8611
|
NFHK n-p114-a pure version SFF-8612
|
boot auto on/off success 自动启停运行成功
|
|
|
-
|
soldered oculink cable SFF-8611 changed 改线序
|
NFHK n-p114-c soldered changed version
|
not recognized fail 未识别显卡
|
|
|
NFHKST N-16PC SFF-8612 changed 改线序
|
boot auto on/off success 自动启停运行成功
|
|||
|
-
|
unknow oculink cable SFF-8611
|
JHH DOCK-OC5 SFF-8612
|
boot auto on/off success 自动启停运行成功
|
changed: oculink cable line sequence be changed, not standard; 改线序：oculink接口和线的线序定义被改动了，非标准线序。
manual on success: the pcie adapter switch is "power on" mode to manual power the gpu card first, then boot pc, and work success。手动启停运行成功：主板卡开关为power on时，主机再开机可以识别显卡并正常工作，并且显卡供电从20w升到100w。但是开关在power off时，显卡没有随机启动，不工作，虽然显卡供电会从0w升到20w左右。
boot auto on/off success: the pcie adapter switch is "power off" mode, gpu can be auto follow the pc boot or shutdown, and "power on" mode manual work also。自动启停运行成功：主板卡开关为power off时，主机开机和关机，显卡都会被自动随主机启停，工作正常，供电功率也正常升降，不需要额外手动控制显卡坞。power on常开，手动启停也兼容。
附上 gpd win max2 7840u 64GB + oculink asus dual 4060 08c 的 3DMark 得分 10520